J7MC
Démarreur du moteur manuel (disjoncteur de protection du moteur)
Système MPCB, protection contre les surcharges, les défauts de phase et les courts-circuits
- La technologie de câblage Push-In Plus permet de gagner du temps lors du câblage et de l'entretien
- Associé au contacteur magnétique modèle J7KC, il est idéal pour le contrôle des moteurs jusqu'à la classe AC-3, 2,2 kW (200 à 240 V c.a.) * ou 5,5 kW (380 à 440 V c.a.).
- Interrupteur à levier (type standard) et interrupteur rotatif (type haute performance)
- Pouvoir de coupure élevé (max. 100 kA/440 V c.a.)
- Équipé d'un couvercle à cadran comme norme de protection contre les modifications de réglage accidentelles. Verrouillable avec un cadenas pour garantir la sécurité au démarrage.
- Certifié conforme aux principales normes de sécurité
Caractéristiques et références
Ordering Information
Main unit
Rocker switch (standard type)
| Rated current (A)(Values in () are the current setting range) | Order code |
|---|---|
| 0.16 (0.1-0.16) | J7MC-3P-E16 |
| 0.25 (0.16-0.25) | J7MC-3P-E25 |
| 0.40 (0.25-0.4) | J7MC-3P-E4 |
| 0.63 (0.4-0.63) | J7MC-3P-E63 |
| 1 (0.63-1) | J7MC-3P-1 |
| 1.6 (1-1.6) | J7MC-3P-1E6 |
| 2.5 (1.6-2.5) | J7MC-3P-2E5 |
| 4 (2.5-4) | J7MC-3P-4 |
| 6.3 (4-6.3) | J7MC-3P-6 |
| 10 (6.3-10) | J7MC-3P-10 |
| 13 (9-13) | J7MC-3P-13 |
| 16 (11-16) | J7MC-3P-16 |
| 20 (14-20) | J7MC-3P-20 |
Rotary switch (high-performance type)
| Rated current (A) (Values in () are the current setting range) | Order code |
|---|---|
| 0.16 (0.1-0.16) | J7MC-3R-E16 |
| 0.25 (0.16-0.25) | J7MC-3R-E25 |
| 0.40 (0.25-0.4) | J7MC-3R-E4 |
| 0.63 (0.4-0.63) | J7MC-3R-E63 |
| 1 (0.63-1) | J7MC-3R-1 |
| 1.6 (1-1.6) | J7MC-3R-1E6 |
| 2.5 (1.6-2.5) | J7MC-3R-2E5 |
| 4 (2.5-4) | J7MC-3R-4 |
| 6.3 (4-6.3) | J7MC-3R-6 |
| 10 (6.3-10) | J7MC-3R-10 |
| 13 (9-13) | J7MC-3R-13 |
| 16 (11-16) | J7MC-3R-16 |
| 20 (14-20) | J7MC-3R-20 |
Options (Order Separately)
Auxiliary contact unit
| Auxiliary contact | Order code |
|---|---|
| SPST-1NO | J73MC-W-10 |
| SPST-1NC | J73MC-W-01 |
Alarm contact unit
| Auxiliary contact | Order code |
|---|---|
| SPST-1NO | J73MC-K-10 |
| SPST-1NC | J73MC-K-01 |
Insulation stop
| Minimum order (bag) | Order code | |
|---|---|---|
| 1 (10 pcs./bag) |
For main unit | J77MC-A |
| For optional unit (For auxiliary contact unit and alarm contact unit) |
J77MC-B |
Specifications
J7MC-3P-⬜ (standard
type)
| Rated current
2
Maximum thermal current setting value. In [A] |
Current setting range Rated operating current [A] |
Instantaneous trip current [A] |
3-phase standard motor capacity
and full load current
2
Full load currents are values for 200 VAC
/ 50 Hz, 400 VAC / 50 Hz, 4P reference motors.
Before applying them, check the full load current of the motor used. |
Rated breaking current Icu [kA] | |||||
|---|---|---|---|---|---|---|---|---|---|
| 200-240 VAC | 380-440 VAC | ||||||||
| Capacity [kW] | Current [A] | Capacity [kW] | Current [A] | 240 VAC | 415 VAC | 440 VAC | |||
| 0.16 | 0.1 to 0.16 | 2.1 | – | – | 0.02 | 0.1 | 100 | 100 | 100 |
| 0.25 | 0.16 to 0.25 | 3.3 | 0.03 | 0.24 | 0.06 | 0.21 | |||
| 0.4 | 0.25 to 0.4 | 5.2 | 0.06 | 0.37 | 0.1 | 0.34 | |||
| 0.63 | 0.4 to 0.63 | 8.2 | --- | --- | 0.12 | 0.41 | |||
| 1 | 0.63 to 1 | 13 | 0.1 | 0.68 | 0.2 | 0.65 | |||
| 1.6 | 1 to 1.6 | 20.8 | 0.2 | 1.3 | 0.4 | 1.15 | |||
| 2.5 | 1.6 to 2.5 | 32.5 | 0.4 | 2.3 | 0.75 | 1.8 | |||
| 4 | 2.5 to 4 | 52 | 0.75 | 3.5 | 1.5 | 3.5 | |||
| 6.3 | 4 to 6.3 | 81.9 | – | – | 2.2 | 4.8 | 50 | ||
| 10 | 6.3 to 10 | 130 | 1.5 | 6.9 | 3.7 | 7.8 | 15 | ||
| 2.2 | 9.5 | ||||||||
| 13 | 9 to 13 | 169 | 2.2 | 9.5 | 5.5 | 10.5 | 50 | 10 | |
| 16 | 11 to 16 | 208 | 3.7 | 15.5 | 7.5 | 13.5 | 25 | ||
| 20 | 14 to 20 | 260 | 3.7 | 15.5 | 11 | 20 | 50 | ||
J7MC-3R-⬜ (high-performance type)
| Rated current
2
Maximum thermal current setting value. In [A] |
Current setting range Rated operating current [A] |
Instantaneous trip current [A] |
3-phase standard motor capacity
and full load current
2
Full load currents are values for 200 VAC
/ 50 Hz, 400 VAC / 50 Hz, 4P reference motors.
Before applying them, check the full load current of the motor used. |
Rated breaking current Icu [kA] | |||||
|---|---|---|---|---|---|---|---|---|---|
| 200-240 VAC | 380-440 VAC | ||||||||
| Capacity [kW] | Current [A] | Capacity [kW] | Current [A] | 240 VAC | 415 VAC | 440 VAC | |||
| 0.16 | 0.1 to 0.16 | 2.1 | – | – | 0.02 | 0.1 | 100 | 100 | 100 |
| 0.25 | 0.16 to 0.25 | 3.3 | 0.03 | 0.24 | 0.06 | 0.21 | |||
| 0.4 | 0.25 to 0.4 | 5.2 | 0.06 | 0.37 | 0.1 | 0.34 | |||
| 0.63 | 0.4 to 0.63 | 8.2 | --- | --- | 0.12 | 0.41 | |||
| 1 | 0.63 to 1 | 13 | 0.1 | 0.68 | 0.2 | 0.65 | |||
| 1.6 | 1 to 1.6 | 20.8 | 0.2 | 1.3 | 0.4 | 1.15 | |||
| 2.5 | 1.6 to 2.5 | 32.5 | 0.4 | 2.3 | 0.75 | 1.8 | |||
| 4 | 2.5 to 4 | 52 | 0.75 | 3.5 | 1.5 | 3.5 | |||
| 6.3 | 4 to 6.3 | 81.9 | – | – | 2.2 | 4.8 | |||
| 10 | 6.3 to 10 | 130 | 1.5 | 6.9 | 3.7 | 7.8 | 50 | ||
| 2.2 | 9.5 | ||||||||
| 13 | 9 to 13 | 169 | 2.2 | 9.5 | 5.5 | 10.5 | |||
| 16 | 11 to 16 | 208 | 3.7 | 15.5 | 7.5 | 13.5 | 50 | 35
2
JEM1195 breaking duty
"O", single time breaking capacity is 50 kA. |
|
| 20 | 14 to 20 | 260 | 3.7 | 15.5 | 11 | 20 | |||
Characteristics
| Model | J7MC-3P-⬜ (standard type) | J7MC-3R-⬜ (high-performance type) | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Item | ||||||||||||||||||||||||||
| Switch type | Rocker switch | Rotary switch | ||||||||||||||||||||||||
| Number of poles | 3 | |||||||||||||||||||||||||
| Rated current In | 0.16 to 20 A | |||||||||||||||||||||||||
| Rated operational voltage Ue | 200 to 690 V | |||||||||||||||||||||||||
| Rated frequency | 50/60 Hz | |||||||||||||||||||||||||
| Rated insulation voltage | 690VAC | |||||||||||||||||||||||||
| Rated impulse dielectric strength | 6 kV | |||||||||||||||||||||||||
| Use category | IEC 60947-2 (circuit breaker), JIS C 8201-2 |
Cat.A | ||||||||||||||||||||||||
| IEC 60947-4-1 (motor starter), JIS C 8201-4-1 |
AC-3 | |||||||||||||||||||||||||
| Trip class (IEC 60947-4-1/JIS C 8201-4-1) | 10 Trips within 4 minutes at 150% Ie on hot start, trips in 4 to 10 seconds at 720% Ie on cold start | |||||||||||||||||||||||||
| Instantaneous trip characteristics | 13 x Ie max. | |||||||||||||||||||||||||
| Power loss (3-phase reference value) | Rated current 0.16 to 2.5 A: 6 W Rated current 4 to 6.3 A: 6.5 W Rated current 10 to 20 A: 7 W |
Rated current 0.16 to 1.6 A: 6 W Rated current 2.5 to 4 A: 6.5 W Rated current 6.3 to 20 A: 7 W |
||||||||||||||||||||||||
| Endurance | Mechanical | 100,000 cycles In=0.16 to 20 A | ||||||||||||||||||||||||
| Electrical | 100,000 cycles In=0.16 to 20 A | |||||||||||||||||||||||||
| Number of terminal insertions and removals [cycles] | 20 | |||||||||||||||||||||||||
| Maximum operate frequency (motor starts) [cycles/hour] | 25 | |||||||||||||||||||||||||
| Phase failure protection | Yes | |||||||||||||||||||||||||
| Trip indicator | Yes | |||||||||||||||||||||||||
| Test trip function | Yes | |||||||||||||||||||||||||
| Rated limit breaking capacity Icu: Rated limit breaking capacity [kA] (Breaking duty O-CO) Ics: Rated operating breaking capacity [kA] (Breaking duty O-CO-CO) Ics=100%Icu (Icu=100 kA) |
Rated operational current Ie Current setting [A] |
IEC 60947-2/JIS C 8201-2 | UL | IEC 60947-2/JIS C 8201-2 | UL | |||||||||||||||||||||
| 240 V 200 V |
415 V 400 V |
460 V 440 V |
500 V | 690 V 600 V |
480 V | 240 V 200 V |
415 V 400 V |
460 V 440 V |
500 V | 690 V 600 V |
480 V | |||||||||||||||
| Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | Icu | Ics | |||
| 0.1-0.16 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 0.16-0.25 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 0.25-0.4 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 0.4-0.63 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 0.63-1 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 1-1.6 | 100 | 100 | 100 | 100 | 100 | 50 | 100 | 100 | 100 | 100 | 100 | 50 | ||||||||||||||
| 1.6-2.5 | 100 | 100 | 100 | 100 | 3 | 2 | 50 | 100 | 100 | 100 | 100 | 8 | 6 | 50 | ||||||||||||
| 2.5-4 | 100 | 100 | 100 | 100 | 3 | 2 | 50 | 100 | 100 | 100 | 100 | 8 | 6 | 50 | ||||||||||||
| 4-6.3 | 100 | 100 | 50 | 38 | 50 | 38 | 3 | 2 | 22 | 100 | 100 | 100 | 100 | 6 | 5 | 50 | ||||||||||
| 6.3-10 | 100 | 100 | 15 | 11 | 10 | 8 | 3 | 2 | 22 | 100 | 100 | 50 | 38 | 50 | 38 | 6 | 5 | 50 | ||||||||
| 9-13 | 100 | 50 | 38 | 10 | 8 | 6 | 5 | 3 | 2 | 22 | 100 | 100 | 50 | 38 | 42 | 32 | 6 | 5 | 50 | |||||||
| 11-16 | 100 | 25 | 19 | 10 | 8 | 6 | 5 | 3 | 2 | 22 | 100 | 50 | 38 | 35
2
JEM1195 breaking
duty "O", single time breaking capacity is 50 kA |
27 | 10 | 8 | 4 | 3 | 50 | ||||||
| 14-20 | 50 | 38 | 25 | 19 | 10 | 8 | 6 | 5 | 3 | 2 | 22 | 100 | 50 | 38 | 35
2
JEM1195 breaking
duty "O", single time breaking capacity is 50 kA |
27 | 10 | 8 | 4 | 3 | 50 | |||||
| Vibration resistance | Vibration: 10 to 55 Hz, acceleration: 15 m/s2 | |||||||||||||||||||||||||
| Shock resistance | Shock value 50 m/s2 | |||||||||||||||||||||||||
| Degree of protection | IP20 (IEC60529) | |||||||||||||||||||||||||
| Operating temperature | –20°C to +60°C | |||||||||||||||||||||||||
| Ambient storage temperature | –40°C to +80°C (no condensation or icing) | |||||||||||||||||||||||||
| Relative humidity | 95% RH max. (no condensation or icing) | |||||||||||||||||||||||||
| Altitude | 2000m max. | |||||||||||||||||||||||||
| Weight | Approx. 430 g | 460 g | ||||||||||||||||||||||||
| Applicable Standards | Safety Standard | EN 60947-2 (IEC 60947-2), UL60947-4-1, CSA 22.2 No.60947-4-1, CCC GB/T 14048.2, Electrical Appliances and Material Safety Act (Non-Specified Electrical Appliances and Materials) |
||||||||||||||||||||||||
En quoi pouvons-nous vous aider ?
Pour toute question ou demande de devis, veuillez nous contacter ou envoyer une demande.
+41 (0)41 748 13 13
Contactez-nous
Contactez-moi J7MC
Merci de votre demande. Nous reviendrons vers vous dès que possible.
Nous rencontrons des problèmes techniques. Votre demande ne peut être traitée. Veuillez nous excuser et ré-essayer plus tard. Détails :
Download+41 (0)41 748 13 13
+41 (0)41 748 13 13
Demander un devis
Demander un devis
Devis pour J7MC
Vous pouvez utiliser ce formulaire pour demander un devis sur le produit de votre choix. Merci de compléter tous les champs *. Les informations sont traitées de manière confidentielle.
Merci de votre demande. Nous vous enverrons l'information demandée au plus tôt.
Nous rencontrons des problèmes techniques. Votre demande ne peut être traitée. Veuillez nous excuser et ré-essayer plus tard. Détails :
DownloadDemander un devis
Demander un devis
Téléchargements
