NX-MD6256-5
NX- Modul, 16 Digitale Eingänge + 16 Digital PNP Ausgänge, 24 VDC, , MIL Steckers
Spécifications
| I/O system | NX I/O Bus |
| Type of module | Digital I/O |
| Number of digital inputs | 16 |
| Digital input type | PNP/NPN |
| Permitted voltage at input | 15-28.8 V |
| OFF/ON delay | 0.02-0.4 ms |
| Number of digital outputs | 16 |
| Digital output type | PNP |
| Permitted voltage at output | 20.4-28.8 V |
| Output current | 0.5 A |
| Short-circuit protected outputs | |
| Connection method | 1-wire |
| Signal processing | Free running, Standard speed, Synchronous |
| IO-Link master | |
| I/O connection type | MIL (plug not included) |
| Number of I/O connectors | 2 |
| Detachable I/O connector | |
| Suitable for safety functions | |
| SIL according to IEC 61508 | None |
| Communication port(s) | None |
| Number of IOV (V+) terminals | 2 |
| Number of IOG (V-) terminals | 2 |
| Number of COM terminals | 2 |
| Degree of protection (IP) | IP20 |
| Product Height (unpacked) | 100 mm |
| Product Width (unpacked) | 30 mm |
| Product Depth (unpacked) | 89.52 mm |
| Product Weight (unpacked) | 160 g |
Accessoires
| XW2D-20G6 | Bornier 20 points pour montage rail din, vis m3, version étroite, connecteur mil 20 points |
|
|
| XW2K-20G-T | Système de câblage d'interface à usage général avec technologie Push-In plus, connecteur MIL 20 points, entrée/sortie, 1 A, NPN/PNP, 125 VAC, 30 V c.c., montage horizontal et vertical sur rail DIN |
|
|
| XW2Z-0100DD-L | Câble E/S, 1 m, entre MIL20 et MIL20, direct |
|
|
| XW2Z-0100DL-L | Câble Entrées/Sorties, 1 m, entre MIL20 et fils libres |
|
|
| XW2Z-0200DD-L | Câble E/S, 2 m, entre MIL20 et MIL20, direct |
|
|
| XW2Z-0200DL-L | Câble E/S, 2 m, entre MIL20 et fils libres |
|
|
| XW2Z-0500DL-L | Câble Entrées/Sorties, 5 m, entre MIL20 et fils libres |
|
|
| XW2Z-100X | Câble 1 m entre bornier XW2B-20G4/G5 et CJ1W-NCx14 / x34 |
|
|
| XW2Z-200X | Câble 2 m entre bornier XW2B-20G4/G5 et CJ1W-NCx14 / x34 |
|
Téléchargements
