S8BA

Features

Kompakte DC-DC USV zur DIN-Schienenmontage. Bestens geeignet zur Vermeidung von Spannungsabfällen und Stromausfällen bei Industrie-PCs/Controllern

  • Die Systemzuverlässigkeit wird erheblich verbessert, da die 24-V DCSpannungsversorgung bei einem Spannungsabfall oder Stromnetzausfall über einen bestimmten Zeitraum aufrecht erhalten wird.
  • Kompakt, Gewichtsreduktion und lange Batterielebensdauer dank Verwendung eines Lithium-Ionen-Akkus.
  • Schraublos-Klemmenblock für die Anschlüsse von Spannungseingang und -ausgang.
  • Abschaltung in Verbindung mit dem IPC oder Controller, realisiert durch in der USV installiertem USB-, RS-232C- und E/A-Anschluss.
Spezifikationen & Bestellinfo

Ordering information

Uninterruptible power supply (UPS)

Input voltage

Output voltage

Output current/capacity

Battery type

Terminal block shape

Order code

24 VDC

24 VDC

5 A/120 W

Lithium-ion battery

Push-in terminal block

S8BA-24D24D120LF

10 A/240 W

S8BA-24D24D240LF

15 A/360 W

S8BA-24D24D360LF

20 A/480 W1

S8BA-24D24D480LF

Communication cable

Specifications

Type

Length

Order code

For RS-232C port

RJ45/Dsub9Pin

2 m

S8BW-C01

For Contact port

RJ45/Discrete wire x 8P

2 m

S8BW-C02

Replacement battery pack

Rated voltage

Rated capacity

Weight

Order code

14.4 VDC

1600 mAh

0.3 kg

S8BA-B120L

Specifications

Item

Capacity

120 W

240 W

360 W

480 W2

DC input

Rated input voltage

24 VDC

Input voltage range

(When standard voltage sensitivity is set)

24 VDC±10%

(When low voltage sensitivity is set)

24 VDC±12.5%

(When high voltage sensitivity is set)

24 VDC±5%

Input maximum current

(for rated input voltage)

5.9 A

11.7 A

17.5 A

23.3 A3

Input terminal

Push-in terminal block

Inrush current

12 A max., 0.1 ms max.

14 A max., 0.1 ms max.

16 A max., 0.1 ms max.

DC output

Rated current

(for rated output voltage)

5 A

10 A

15 A

20 A4

Switching time

Uninterrupted

Output voltage

Normal operation

Output of input voltage as-is

Backup operation

24 V±5%

Output terminal

Push-in terminal block

Battery

Type

Lithium-ion battery

Rated voltage

14.4 VDC

Rated capacity

1600 mAh × 1 parallel

1600 mAh × 2 parallel

1600 mAh × 3 parallel

1600 mAh × 4 parallel

Expected battery life5

2.5 years (50°C), 5 years (40°C), 10 years (25°C)

Replacement by user

Yes (Hot swapping)

Charging time

4 hours6

Backup time (25°C, initial characteristics)

6 min. (120 W)

6 min. (240 W)

6 min. (360 W)

6 min. (480 W)

Environment

Operating ambient temperature/humidity

0 to 55°/10 to 90% (with no condensation)

Storage ambient temperature/humidity

-20° to 55°/10 to 90% (with no condensation)

Enclosure

Dimensions (W × D × H mm)

94 × 100 × 100

148 × 100 × 100

270 × 100 × 100

Weight of unit

Approx. 0.8 kg

Approx. 1.3 kg

Approx. 2.0 kg

Approx. 2.3 kg

Cooling method

Natural cooling

Safety standard compliance

UL508/CE/C22.2 No.107.1-01

Marine standards

Lloyd‘s register/ABS/EN609457/DNV GL (Certification is pending for DNV GL)

Internal power consumption (normal8/maximum9)

7 W/22 W

11 W/41 W

14 W/60 W

18 W/80 W

Serial communication

RS232C (Interface terminal)

Yes (RJ45)

USB (interface terminal)

Yes (B connector)

I/O signal

Yes (RJ45)

Backup time table (Time unit: minutes)

For devices that use the A indication, convert the capacity into W: W = A × 24

 

Capacity (W)

30

60

90

120

180

240

300

360

420

480

120 W

29

14

9

6

-

-

-

-

-

-

240 W

58

29

19

15

9

6

-

-

-

-

360 W

87

43

28

22

14

10

8

6

-

-

480 W

119

59

39

29

19

15

11

9

8

6

Note: The above backup times are for reference only. They may change depending on the battery life and external environment (such as temperature).

Dimensions

S8BA-24D24D120LF (120 W)

S8BA-24D24D240LF (240 W)

S8BA-24D24D360LF (360 W)
S8BA-24D24D480LF (480 W)


1. 16.7 A/400 W for use as a UL compliant device.

2. 400 W for use as a UL compliant device.

3. 20 A for use as a UL compliant device.

4. 16.7 A for use as a UL compliant device.

5. An estimated value for standard mounting. Not a guaranteed value.

6. When using in an environment at a high temperature, charging may be paused by charging temperature protection, then the charging time will be longer than specified time.
“CS” will be displayed when charging temperature protection is operated.

7. For the S8BA-24D24D120LF, install all of the RSMN-2030, RSHN-2030, and RSEN-2030 EMC filters manufactured by TDK. For the S8BA-24D24D240LF, S8BA-24D24D360LF, or S8BA-24D24D480LF, install both the RSMN-2030 and RSHN-2030 or their equivalents. Install these filters in series to the cable connected to the DC input terminal block. When you do, do not connect anything to the GR terminal.
The effectiveness of the noise filters may be affected by the installation environment. Be sure to check effectiveness before starting operation.

8. Conditions: With rated loads connected, at a rated input voltage, and with the battery fully charged.

9. Conditions: With rated loads connected, at a rated input voltage, and at the maximum battery charging current.

1. 16.7 A/400 W for use as a UL compliant device.

2. 400 W for use as a UL compliant device.

3. 20 A for use as a UL compliant device.

4. 16.7 A for use as a UL compliant device.

5. An estimated value for standard mounting. Not a guaranteed value.

6. When using in an environment at a high temperature, charging may be paused by charging temperature protection, then the charging time will be longer than specified time.
“CS” will be displayed when charging temperature protection is operated.

7. For the S8BA-24D24D120LF, install all of the RSMN-2030, RSHN-2030, and RSEN-2030 EMC filters manufactured by TDK. For the S8BA-24D24D240LF, S8BA-24D24D360LF, or S8BA-24D24D480LF, install both the RSMN-2030 and RSHN-2030 or their equivalents. Install these filters in series to the cable connected to the DC input terminal block. When you do, do not connect anything to the GR terminal.
The effectiveness of the noise filters may be affected by the installation environment. Be sure to check effectiveness before starting operation.

8. Conditions: With rated loads connected, at a rated input voltage, and with the battery fully charged.

9. Conditions: With rated loads connected, at a rated input voltage, and at the maximum battery charging current.

Software
ssd_mark.jpg

Simple Shutdown Software

Die "Simple Shutdown Software“ (Open-Source-Version) kann Computer und USV-Einheiten automatisch herunterfahren, wenn ein Problem mit der Stromversorgung auftritt (Stromausfall usw.). Wir stellen diese Software als kostenfreien Download bereit. Mit dieser Software und dem Quellcode können Sie Funktionen zum automatischen Herunterfahren in Ihr Linux- oder Windows-System integrieren. Simple Shutdown Software herunterladen .
utility_mark.jpg

UPS Setting Utility Software

UPS Setting Utility ist ein Softwareprogramm zum Konfigurieren der Einstellungen in der USV. Mit diesem Dienstprogramm können die USV-Einstellungen einfach geändert werden. Sie können die USV-Einstellungen auch in einer Datei sichern und Einstellungen zu einer anderen USV übertragen. UPS Setting Utility Software herunterladen
Downloads

Broschüren

Alle anzeigen broschüren

Datenblätter

Alle anzeigen datenblätter

Handbücher

Alle anzeigen handbücher

Software-Tools

download

PowerAct Pro Master Agent Software

en ZIP 90 MB
o

Bitte oder direkten Zugang erhalten um dieses Dokument herunterzuladen

download

PowerAct Pro Slave Agent Software

en ZIP 10 MB
o

Bitte oder direkten Zugang erhalten um dieses Dokument herunterzuladen

download

SimpleSoftwareVer230_Linux_X64 Software

en ZIP 500 KB
o

Bitte oder direkten Zugang erhalten um dieses Dokument herunterzuladen

download

SimpleSoftwareVer230_Linux_x86 Software

en ZIP 500 KB
o

Bitte oder direkten Zugang erhalten um dieses Dokument herunterzuladen

download

SimpleSoftwareVer250_Windows Software

en ZIP 7 MB
o

Bitte oder direkten Zugang erhalten um dieses Dokument herunterzuladen

download

UPS_utility_ver401 Software

en ZIP 1000 KB
o

Bitte oder direkten Zugang erhalten um dieses Dokument herunterzuladen

Alle anzeigen software-tools